Tube Mill Consumables: Inspection & Replacement Guide
Meet MIVI at Tube China 2026
Meet MIVI at Tube China 2026
ERW Tube Mills · Custom Rollers · Tube Mill Consumables
September 21–24, 2026 | Shanghai New International Expo Centre | Booth W3B17-2
Planning a new tube production line, replacing a roll set or looking for the right consumables? Meet the MIVI team in Shanghai to discuss your requirements.
Bring your tube size list, a part drawing or photos of your current setup. We can use those details to discuss possible options and identify what needs further technical review.
What Would You Like to Discuss?
Choose a Tube Mill Around Your Main Products
Your largest tube size is only part of the picture. The sizes you produce most often, wall thicknesses, material grades and production targets all matter when comparing line configurations.
Tell us what you plan to manufacture and which sizes account for most of your orders. We can discuss ERW tube mill options for round, square and rectangular tubes, along with the information needed to prepare a proposal.
Bring: Your size range, wall thicknesses, material specifications and target output.
Check Roller Requirements for an Existing Mill
Need a replacement roll set or want to discuss a different tube profile? Start with your existing equipment. Shaft dimensions, stand arrangement, available drawings and the required tube specification help define the next step.
Discuss custom forming, fin and sizing rolls with MIVI. Compatibility and any required machine changes need technical assessment before a solution can be confirmed.
Bring: Machine information, roll drawings if available, and photos of the relevant stands.
Review Your Consumables Requirements
Looking for ferrite rods, impeders, PTFE tubes, induction coils, zinc spray components or saw blades? Share the part you currently use and the problem you are trying to solve.
A drawing or clear photo with dimensions gives us a useful starting point. For recurring wear or production problems, include operating conditions and when the issue occurs so we can identify the information needed for further review.
Bring: Part dimensions, current specifications, required quantity and photos of the issue.
Browse MIVI tube mill accessories
Bring a Few Details. Make the Meeting More Useful.
| Your requirement | Helpful information |
|---|---|
| New tube mill | Tube shapes and sizes, wall thicknesses, material grades, main production sizes, target output and project timing |
| Replacement or custom rollers | Existing mill details, shaft dimensions, roll drawings, tube specifications and current forming issues |
| Consumables or spare parts | Part name, dimensions or drawing, operating conditions, quantity and required delivery date |
You do not need every detail before contacting us. Send what you have, and we can clarify what else is needed.
Plan Your Visit
| Event details | Information |
|---|---|
| Exhibition | Tube China 2026 |
| Dates | September 21–24, 2026 |
| Venue | Shanghai New International Expo Centre, Shanghai, China |
| MIVI booth | W3B17-2 |
Let us know your preferred day and what you would like to discuss. We will confirm the meeting time directly with you.
Questions Before You Visit
Can I discuss a project that is still at the planning stage?
Yes. Share your intended tube products, main sizes and production goals. The discussion can help identify the information needed for a more detailed proposal.
Can I ask about rollers for an existing tube mill?
Yes. Bring the machine details and any available drawings. Roller compatibility must be reviewed against your existing equipment and required tube specifications.
What should I send for a consumables inquiry?
Start with the part name, dimensions or drawing, quantity and application. Photos of the current part and installation can help clarify the request.
Can I receive a quotation at the exhibition?
We can discuss your request at the booth. A confirmed quotation depends on having sufficient specifications and completing any necessary technical checks.
Can I arrange a factory visit as well?
Please contact Rainy in advance with your preferred date and what you would like to see. Factory visits are subject to confirmation and availability.
What if I cannot attend Tube China?
You can still send your requirements to MIVI. We can continue the discussion by email or arrange a call.
Let's Talk About Your Tube Production Requirements
Tell us what you make, what you want to improve and when you plan to move forward. We look forward to meeting you at Tube China 2026.
Prefer to contact us directly?
Rainy | Yangzhou MIVI Machinery Manufacturing Co., Ltd.
Email: rainy@mivigroup.com
WhatsApp / Phone: +86 13852715449